Timeless Arista ring

"this ring is the most stunning, spectacular ring I have ever viewed!" 

-- Customer Testimonial

One of the most stunning rings you will find, anywhere.  The ring is richly covered in micropave diamond, to the extent that it appears that the entire ring shank is composed of all diamond.  

This look is achieved by using 80, 1.1mm natural diamonds (top grade - F/G color, VS clarity and well cut), expertly set for a total carat weight of .40ctw.

In addition - we set a surprise diamond on the underside of the center stone, a unique and special touch that is a hallmark of our Timeless rings.

Finally - we've updated the Arista to be an entirely 'one piece' or unibody ring. This is extremely rare, as most rings are created by taking the shank (circular portion) and then welding the prongs (or head) onto the shank to make the final ring.  A rod slots into the ring shank and is then welded togegther (known as a 'peg head').  This avoids the high expense of having to make a complete mold design for every possible center stone size, but sacrifices the total strength of the ring due to having weld seams.

The solder on this weld point can corrode or crack over time, and when it fails, can result in the entire center stone and prong head simply falling out possibly losing the center diamond/Amora!  (One example on our message boards here:  http://talk.jewelry/threads/platinum-setting-broke-shoddy-workmanship-please-help.54965/)

For the Arista as well as our Timeless Regal, we've moved to casting the entire ring as a single unibody casting.  This eliminates the weak point where the ring shank and prongs are welded, as there is  *zero* weld points/seams between the head and the shank, and thus provides maximimum strength for a true lifetime ring.

This unibody design also ensures perfect alignment to all aspects of the ring - a common 'flaw' in many rings is the prong head may not be 100% aligned relative to the shank when viewing the ring from the side, or in extreme cases, top down. This is due to the difficulty of getting it perfectly aligned during the welding process - again, by casting the entire ring as one piece, perfect alignment is assured every time.

Video of the Arista ring:

A video of the Arista ring and matching band is below:

Details:

Low set micropave with clean taper.

Available in platinum.

Comfort fit shank.

Top grade natural diamonds - F/G color, VS clarity, well-cut and matched.

Matching band is available for purchase here

When ordered in Platinum, our Timeless Arista Ring is among the only rings available in the world that are 'High Pressure Enhanced' after casting.

This cutting edge high pressure process causes densification to the metal yielding a finished ring up to 20% harder than normal platinum!

The result is crisper polishing and a longer lifetime of beauty.    
More details including comparison photos are on our High Pressure Enhanced page here.

___________________________________________________________

Measurements:

Width:  2.90mm 

Thickness: 2.17mm high

Height off of finger: 6.05mm for a 7mm center (a low set ring for ease of daily wear)

____________________________________________________________

This ring is suitable for 1ct - 6ct Round centers.  (We recommend the Amora Eternity Super Ideal H&A).

Please add a center stone to your cart for a completed, ready-to-wear ring!  This item is the ring mounting only (ring shank with side damonds, and prong head).  Center stone is not included.  

 Or, if you have your own center stone that fits within the parameters of this ring mounting (see suitable center stones above), please specify the dimensions of your center stone in the 'Order Instructions/Comments' section during checkout so that we can send you a ring mounting that has the correctly sized prong head to fit your stone.

Please note that pricing can vary monthly due to fluctuations in metal and diamond pricing.    

Due to our sales volume, please allow an average of 15-20 business days between placing an order for this ring and receiving it. Please do not send an e-mail to inquire about the status of your order until at least two to three full weeks have passed since order placement.

We do not accept requests or financial inducements to "rush" a ring order - it does neither of us any good to rush a ring and then ship you a ring that is less than top-quality workmanship, so please plan ahead and order early.   

If you have a special occasion planned that involves your ring order, please specify the date you need the ring by under the special instructions during checkout - we will do everything we can to make sure you have your ring by the date specified.

We hold the right to refuse any order that needs to be delivered within a timeframe we consider inadequate for the satisfactory and high-quality completion of the ring.

We will *not* consider any requests to deliver a ring by a certain date after your order has been placed.